Level control technology and Pump controls
PSN
Float switches which turns On and Off
depending on the cable length
Fill level switch in wastewater pumping stations, used water tanks, stormwater utilization systems, sump pits, etc. for direct and indirect control of pumps
Electronic level relay
Measuring range 0,1 – 2 m
Output signal 0 - 10 V
Electronic level controls are used where fill levels in tanks and
pits have to be kept at an exact level or where fluids should be
pumped out.
ENS
Stainless steel level sensor
Output signal 4 - 20 mA
For constant detection of minimal changes in water level in shafts
and pits, larger pump stations for wastewater or stormwater
drainage, with and without the risk of explosions.
Accessories:
Bells and accessories for Level monitoring
Bell plungers: robust and maintenance-friendly solution for detecting fill levels in pressurized drainage systems, small pump stations, sewage collection shafts. Approved for use in explosion-risk areas.
Type "ACS"
Drinkable
Type "SiHF"
High Temperature
Type "FEP"
Chemical Ambient
Type "ATEX"
II 1G Ex ia IIC T6 Explosive*
Suspended float switch - "T" series
Used in domestic , industrial or municipal sector , for waste water , drinking water , chemical substances and environment for use in explosive areas (ATEX)*.
Ideal for level control in drainage systems , pumping stations , wastewater systems , drinkable water fountains , drinks an foodstuffs , ship building ,...
*The rules of the DIN EN 60079 to be observed!
Basis pump control
Compact pump controls CPS-B1 and -B2 of the latest generation for more system transparency.
They are designed for the automatic control of one or two pumps (max. 4 kW/9A).
Modular pump control CPS-M PLUS of the latest generation for more system transparency and function.
They are designed for the automatic control for the operation of up to four pumps (max. 75 kW).
Level control technology,
this pump control can be ideally used for pumping systems in the field of domestic waste and sewage water as well as rain water.
Electronic control for level-dependent pump power controls, from 0.5 KW to 4 KW, for building drainage systems and pressurized drainage systems, as both single and double pump stations.
Level control technology,
for use in municipal, industrial, commercial and domestic applications.
CPS-B
new generation
CPS-M
The CPS-L pump control is designed for the automatic control of one pump (max. 4 kW / 9A).
Level control technology ,
this pump control can be ideally used for pumping systems in the field of domestic waste and sewage water as well as rain water.
CPS-B SA
new generation
Basis Pump control
Compact pump control CPS-B1 and -B2 with soft starter of the latest generation, are designed for the automatic control of one or two pumps (max. 11 kW/25A).
Level control technology,
this pump control can be ideally used for pumping systems in the field of domestic waste and sewage water as well as rain water.
Water management for riding ground technology
Area of application
Condor Riding ground control CRS2-TFT for the automatic control of 1-2 pumps with TFT display.
Riding ground technology -
Designed for riding grounds with the "ebb and flow system".
Automatic irrigation and drainage of riding grounds and riding arena floors (indoor & outdoor), therefore optimum ground conditions under different weather influences.
CRS4
Condor Riding ground control CRS2-TFT for the automatic control of 1-4 pumps with TFT display.
Riding ground technology -
Designed for riding grounds with the "ebb and flow system".
Automatic irrigation and drainage of riding grounds and riding arena floors (indoor & outdoor), therefore optimum ground conditions under different weather influences.
Condor Riding ground control CRS2-TFT for the automatic control of 1-8 pumps with TFT display.
Riding ground technology -
Designed for riding grounds with the "ebb and flow system".
Automatic irrigation and drainage of riding grounds and riding arena floors (indoor & outdoor), therefore optimum ground conditions under different weather influences.